MilesWeb
MilesWeb Hosting Forum

Please login or register.

Login with username, password and session length

 

News:

SMF - Just Installed!


Author Topic: How To Open and Close Port 25 In Your Firewall ?  (Read 4450 times)

0 Members and 1 Guest are viewing this topic.

Offline saurabhj

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
    • View Profile
How To Open and Close Port 25 In Your Firewall ?
« on: July 20, 2015, 07:41:03 PM »
Occasionally you will find that you need to open up a port in your firewall for some application or another. Depending on which firewall is installed on your server, there are several ways to go about this.

CSF (ConfigServer Security & Firewall)   :   CSF can be configured in Web Host Manager (WHM) as well as over ssh.

[1] Open up the following file:                           
Quote
       /etc/csf/csf.conf

[2] Add the port you mean to open to the needed line:               
Quote
      # Allow incoming TCP ports
      TCP_IN = "20,21,22,25,53,80,110,143,443,465,587,993,995,26"
      # Allow outgoing TCP ports
      TCP_OUT = "20,21,22,25,37,43,53,80,110,113,443,587,873"    


[3] CSF then needs to be restarted for the change to take effect:
Quote
       csf  -r


APF (Advanced Policy Firewall)   :   APF can only be configured by accessing the server over ssh, as the root user. Once in your server, Follow the steps below.

[1] Open the following file in your favorite text editor:
Quote
   /etc/apf/conf.apf

[2] Search the following line:
Quote
   # Common inbound (ingress) TCP ports
      IG_TCP_CPORTS="20,21,22,25,53,80,110,143,443,465,993,995"

[3] After saving and closing out of your text editor, you will need to restart APF. This is as simple as running:
Quote
   apf -r


WHM (Web Host Manager) :
Quote
[1] Type configserver in the Find bar in the upper left hand corner.
[2] Click on ConfigServer Security&Firewall.
[3] On that page, click on the Firewall Configuration button:
[4] That page will allow you to edit the exact same file you would if you were accessing it over ssh:
[5] Like with the ssh instructions, add the necessary port to the list.
[6] Then click Change at the bottom of the page to save your changes.
[7] After that is run, you will need to restart csf. Thankfully, the very next screen you can see there is a button for that, Restart csf+lfd.


Closing ports    :   Closing ports in either firewall are as simple as removing the port from the list in the configuration file, and restarting the firewall.

MilesWeb Hosting Forum

How To Open and Close Port 25 In Your Firewall ?
« on: July 20, 2015, 07:41:03 PM »